All products
When operating heavy demolition or excavation equipment, downtime is the enemy of profitability. Among hydraulic hammer components, **oil seals and hydraulic seal kits** are the critical frontline defense against pressure loss, oil leakage, and internal damage.
If you are operating or servicing a **SOOSAN SB60 Rock Hammer**, utilizing the correct **C21011 Hydraulic Breaker Seal Kit** is essential to restore peak striking performance, protect your excavator’s hydraulic circuit, and extend hammer service life.
—
## Why the SOOSAN SB60 Seal Kit (C21011) is Critical for Equipment Performance
The **SOOSAN SB60** is a benchmark mid-sized hydraulic breaker widely used across quarrying, trenching, road demolition, and general construction. Operating under extreme pressure (often exceeding 150–180 bar) and intense high-frequency vibrations, hydraulic seals inevitably experience wear and thermal degradation over time.
A compromised seal kit leads to:
1. **Loss of Impact Energy:** Fluid bypass lowers the piston striking force.
2. **Hydraulic Oil Contamination:** Damaged dust seals allow abrasive grit and dirt into the cylinder body.
3. **Overheating & System Failure:** Continuous leakage forces hydraulic pumps to overwork, causing thermal degradation of oil throughout the excavator system.
—
## What’s Included in the C21011 Seal Kit Package?
A professional repair kit must contain high-grade materials engineered to withstand severe pressure, high temperatures, and continuous mechanical friction. The **C21011 Seal Kit for SOOSAN SB60** includes:
| Component Type | Material / Features | Main Function |
| :— | :— | :— |
| **Main Piston Oil Seal** | High-grade PTFE / Polyurethane | Retains high hydraulic pressure around the piston |
| **Buffer Seal (HBY/HBTS)** | Polyurethane + Nylon Back-up Ring | Absorbs extreme peak pressure spikes during striking |
| **Dust Seal (Wiper Seal)** | Wear-resistant NBR / Polyurethane | Prevents outer dirt, dust, and rock dust from entering |
| **Gas Seal / O-Rings** | High-temp NBR / FKM (Viton) | Seals nitrogen accumulator and internal fluid channels |
| **Wear Rings (Guide Rings)** | Phenolic Fabric / Bronze PTFE | Prevents metal-to-metal contact between piston and cylinder |
—
## Cross-Reference Guide: SOOSAN Hydraulic Breaker Models & Seal Kit Part Numbers
To help excavator operators and maintenance technicians source the exact replacement parts, we have mapped out the seal kit cross-reference guide for popular **SOOSAN SB-Series** hydraulic rock hammers below.
Searching by your specific hammer tonnage or part number ensures optimal sealing performance and prevents unnecessary job-site downtime.
| SOOSAN Breaker Model | Suitable Carrier / Excavator Weight | Chisel / Tool Diameter (mm) | Corresponding Seal Kit Part Number |
| :— | :— | :— | :— |
| **SOOSAN SB40 / SQ40** | 4.0 – 7.0 Ton | 68 mm | COX001 / CO1012 |
| **SOOSAN SB50 / SQ50** | 11.0 – 16.0 Ton | 100 mm | C1X001 / C11012 |
| **SOOSAN SB60 / SQ60** | 15.0 – 18.0 Ton | 125 mm | **C21011** |
| **SOOSAN SB70 / SQ70** | 18.0 – 21.0 Ton | 135 mm | C2X005 / C21012 |
| **SOOSAN SB81 / SQ80** | 18.0 – 26.0 Ton | 140 mm | C3X005 / C31012 |
> **Pro Tip for Maintenance Managers:** Always verify your breaker’s exact sub-series tag (e.g., *SB60TS-P*, *SB60TR-F*, or *SQ60*) when placing an order. While internal cylinder dimensions stay consistent, accumulator seals or side-bolt O-rings may vary slightly depending on the exact housing design.
—
## Key Benefits of Upgrading to Premium C21011 Oil Seal Kits
### 1. High Temperature & Pressure Resistance
High-intensity hydraulic hammer operation generates localized friction heat exceeding **100°C**. High-performance seal kits utilize specialized polyurethane (CPU/TPU) materials that resist extrusion, hardening, and thermal degradation under pressure.
### 2. Precise OEM Compatibility
The **C21011 kit** is precision-molded to match the exact dimensions of the SOOSAN SB60 cylinder, valve body, and front cover assembly. This guarantees zero fluid blow-by and smooth installation without seal twisting.
### 3. Extended Operating Hours
By using abrasion-resistant sealing compounds, these repair kits significantly stretch your maintenance interval—reducing job-site downtime and labor replacement costs.
—
## Step-by-Step Installation Tips for SOOSAN SB60 Seal Replacement
> **Safety Warning:** Always discharge the accumulator pressure and relieve hydraulic system pressure completely before disassembling any part of the hydraulic breaker.
1. **Thorough Cleaning:** Thoroughly wash the outer body of the SOOSAN SB60 hammer to prevent dirt from contaminating internal hydraulic surfaces during teardown.
2. **Inspect the Piston & Cylinder:** Before installing new seals, inspect the piston rod and cylinder bore for deep scuffs or scratches. Damaged metal surfaces will ruin new seals immediately.
3. **Lubricate Before Fitting:** Apply clean hydraulic oil or specialized assembly grease to the seal grooves and new rubber components to ensure safe seating without tearing.
4. **Use Proper Tools:** Use soft seal installation tools (brass or plastic levers) to insert internal O-rings and U-cup seals without scratching the precision sealing lips.
—
## Frequently Asked Questions (FAQ)
### How often should I replace the hydraulic seals in a SOOSAN SB60 breaker?
It is recommended to replace hydraulic seal kits every **600 to 1,000 operating hours**, or immediately if you notice oil weeping along the chisel tool bushing or a noticeable drop in impact power.
### Will the C21011 seal kit fit other breaker models?
The **C21011** part designation is specifically matched to **SOOSAN SB60 / SB60TSP / SQ60** rock hammers. Always double-check your hammer model number and part manual before ordering.
### What are the main signs of a blown hydraulic breaker seal?
* Oil leaking heavily down the chisel shank/bushing.
* Reduced striking frequency or power.
* Hydraulic fluid turning dark or contaminated quickly.
* Excessive hydraulic hose vibration due to pressure bypass.
—
## Need Premium Hydraulic Breaker Seals? Get a Fast Quote Today!
Keep your heavy machinery operating at peak power and avoid costly unscheduled downtime. Whether you need an individual **C21011 Seal Kit for SOOSAN SB60** or bulk wholesale supplies for an entire fleet, we offer factory-direct pricing, guaranteed OEM fitment, and express global dispatch.
### Why Partner With Us?
– **100% Quality Assurance:** High-durability materials designed for demanding quarrying & demolition applications.
– **Fast Worldwide Shipping:** Express delivery directly to your repair facility or job site.
– **Expert Technical Support:** Unsure about part compatibility? Our engineering team is ready to assist you.
—
### Request Your Free Quote & Catalog
Ready to place an order or need assistance identifying your hydraulic hammer seal kit?
* **Submit an Online RFQ:** Fill out our fast inquiry form below with your required quantities.
* **Direct Email Contact:** Send your equipment serial number or part inquiry to **sales@yourdomain.com**.
* **WhatsApp / Urgent Assistance:** Message our team directly at **+86-18925220395 for real-time stock availability.
[ **GET A FREE INSTANT QUOTE NOW** ]
